![]() To set tile along the face of QUADEC-FS, apply thin-set mortar to the back of the tile using a margin trowel. Leave a space of approximately 1/16" – 1/8" (1.5 – 3 mm) between the profile and the tile.Ĥ. Note: QUADEC-FS may also be attached to the substrate with fasteners.ģ. Leave a space of approximately 1/16" – 1/8" (1.5 – 3 mm) between the profile and the tile. Using a notched trowel, apply a sufficient amount of thin-set mortar to this area and/or to the back of QUADEC-FS and press the profile into the mortar and align. Set tiles up to the area where QUADEC-FS is to be installed as a feature strip.Ģ. Note: Matching inside corners/outside corners/end caps are available. The profile may also be attached to the substrate with fasteners (e.g., where the profile is not surrounded by field tile). QUADEC-FS is anchored in the mortar bond coat between tile courses via its cross-sectional shape and can be used with thicker tiles by building up the setting material behind the profile. ![]() The top and bottom edges of the profile are square and designed to integrate with the QUADEC profile. The profile is available in anodized aluminum and features a 2" (51 mm)-wide recessed section with dovetailed grooves to which field or accent tile up to 5/16" (8 mm)-thick is bonded. Schluter®-QUADEC-FS is a double-rail feature strip profile for producing accents in tile fields on walls, chair rails, and various other decorative applications.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |